how to enable AAA-DHCP monitoring in DNA

[Ahmed Tarek]

hi all,

i need to monitoring AAA - DHCP monitoring in DNA 2.3.5

as 2 images i uploaded there is ( no data to display ) , how can add AAA and DHCP to check ?

thanks

[M02@rt37]

Hello @Ahmed Tarek,

Follow this "Monitor the DHCP Network Service"

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center-assurance/2-3-5/b_cisco_dna_assurance_2_3_5_ug/m_monitor-network-services.html

[Ahmed Tarek]

thanks M02@rt37 for your reply

unfortenatelly i already check this guide, but the guide is depending on that feature is running, but in my case i think there is service missing or something need to activate.

pls check my 2 images.

thanks again

[guruvignesh]

Hello Ahmed,

To monitor AAA and DHCP in Cisco DNA Center 2.3.5:

1. Access DNA Center and go to Assurance.
2. Choose AAA or DHCP monitoring.
3. Configure settings like devices and metrics.
4. Apply filters and criteria for focus.
5. Save settings to start monitoring.

[Ahmed Tarek]

Hello M02@rt37 

there is no ( Configure settings like devices and metrics.  ) to configure

always see ( No Data to display )

[liviu.gheorghe]

Hello @Ahmed Tarek ,

Take care of the following limitations when configuring AAA and DHCP monitoring:

AAA Limitations

• AAA Network Service supports wireless clients and Local mode.

• AAA Network Service does not support the following:

  • AireOS Wireless Controller

  • Flex mode or fabric mode

DHCP Limitations

• DHCP Network Service supports wireless clients and Local mode.

• DHCP Network Service does not support the following:

  • SD-Access fabric clients

  • AireOS Wireless Controller

  • Flex mode or fabric mode

Hope this helps.

[Ahmed Tarek]

thanks @liviu.gheorghe for your reply,

but i still not know how to run this feature, 

as it still not appear