Cisco Champion Public Discussions

Hi, in a Datacenter, I have 1 Operation Center and 4 Prime instances. I want to upload the bundle file to upgrade from 3.2 to 3.4, but I have a poor bandwitdth between my FTP server (laptop) and the servers. I already uploaded the file to my Operatio...

Hello All,   I have gone through symantec server log, where ICMP 3 is made to internally hosted application IP from NetFlow Controller server. Through system process, C:/Windows/system32/NTOSKRNL.EXE I have googled about the NetFlow controller and fo...

our customer want to use 8 nos. standalone unleash cisco wireless access points, wsa1832i in a network and also want to use a cisco smb firewall for a network of 60 concurrent internet users.  kindly let us know if otp features is available in the ha...

I am new in EIGRP, and I used 18 routers with different AS, I have total 6 AS, in first AS router1 and router2 are unable to find network for AS 5 and AS 6, is it problem with hold down timer, what I guess from it entry is not found due to packet is ...

Hi everyone,   I'm setting up a Cisco 897VAG-LTE with a vDSL connection that does not use PPP for authentication (just VLAN100), with a 4G failover.   The vDSL service works, when I do not have "ip nat outside" applied to the interface. I'm able to p...

Does the Cisco 2960TT-L support poe on the 24 port switches 

Hi All,   I gave interview at Cisco  for IPT engineer,and the first question they asked about IP Phone registration process,and i answered in detail as per my knowledge,But i dont think the were looking for that answer, Can anybody help me with the i...

Hi Experts,   We have configured internet access for ACI fabric using BGP peering with external ISP routers in common tenant and there is a requirement that customer need to configure another BGP peering in different tenant with VPN routers for the s...

Dear All,   I have two 3850 as core (STACK) and two 2960-x as  edge. I tried to configure as LACP ( Channel-group 9 mode active) between the core and the edge, but it's not working as both ports blocked.  Topology: Core Switch 1 and Two are in a stac...

Cisco 7841 model automatic going to speaker mode while on active calls,Internal calls are getting disconnected in middle of active calls.kindly help what must be the issue