I had a customer ask me for a way to easily collect all serial number from a UCS so they could give to their services team to make sure everything was covered under their SmartNet contract. This is what I came up with.
This script allows you to log into a single or multiple UCS Domains and it will create an Excel spreadsheet of all the devices and their serial numbers.
Prerequisites:
PowerShell v3 or greater enabled on your client machine
Network access to your UCSM
An account on your UCSM
Excel installed on the client machine
Cisco PowerTool for PowerShell installed in the client machine
Change Log:
v0.5 - Initial posted version
v0.5.01 - Added feature to exit script if you only provide a single domain and domain log in fails or if you are not logged into any UCSM.
v0.5.02 - Added one more error check for login
v0.5.03 - Found that older B230's that don't have DIMMs in a slot report their serial number as NO DIMM. Look for that and ignore entering those into the inventory.
v0.5.04 - Requires PowerShell V3 and now has a check to ensure you are running it or higher.
v0.6 - Added a column with the associated Service Profile for the equipment where applicable.
v0.7 - Added a column with the manufacturing date/time of the equipment where available.
v0.8 - Added section to collect local hard disk info
v0.9 - Added built in help. Command line options. Standard naming convention.
v0.9.0.1 - Added support for saved credentials file
v0.9.10 - Add fields with UCSM Licensing Information
As always, let me know if you have any questions, problems or suggestions.
Joe
