This UCS PowerShell Script will log into multiple UCS domains and provide you information on the UCS system including the name, site and version and then go through each chassis and tell you what is plugged into each slot and if there is an open slot. If you provide user labels and descriptions on the chassis' and blades you can get more detailed information.
The purpose of this script is to allow someone with a large deployment to quickly find out where in their data centers they have open slots to add more blades and if the firmware on the UCS will support the new blade.
v0.6 - Initial Posted Version
v0.7 - New look and feel. Common scripting elements. Checks that you are running PowerShell v3 or above.
v0.7.01 - Added built in help. Command line options. Standard naming convention.
v0.7.02 - Added support for saved credentials file
v0.7.03 - Added support for B200-M4 and B260-M4/B460-M4
v0.8 - Major updates in the logic to identify the slots of a Blade.
Added support for Full Width, Double High blades, for ex. B460.
As always, let me know if you have any questions, problems or suggestions.
Hi, Lenovo/HP and DELL seem to have developed plugins for Vmware vRealize Lifecycle Manager. Is there a Cisco UCS plugin also available for the same or is there any plans of developing one..? Thanks,Indika.
We are attempting to leverage PowerTool to retrieve driver version details based on an uploaded hardware profile. We can complete the process from end-to-end. However, we cannot seem to get any more information other than the VIC (CNA) driver information....
Hello, we want to configure raid in one of our cisco hx220c m5 nodes, however, the default raid controller(hx-sas-m5) doesn't support the raid. Therefore, it would be very helpful if anyone could suggest to me a raid controller that will be supported by t...
Hi all, I am trying to create a BIOS policy using PowerTool and UCSPE with this script:Start-UcsTransaction$newbiospolicy = Add-UcsBiosPolicy -Org $orgs -Name NewBiosPolicy2 -Descr "New powershell ...
I'm working on scripting out config backups of standalone c240 servers using the utils module of the imcsdk for python: https://ciscoucs.github.io/imcsdk_docs/imcsdk.utils.html?highlight=backup_create#imcsdk.utils.imcbackup.backup_create This wo...