This pre-installed native Semtech Packet Forwarder is strictly used for the lab validation only, not for any production or commercial purpose. Cisco did not execute any functionalities, scale, robustness and interoperability test on it. Cisco does not provide any support neither if there has any issues of it. If you need source code or support, please open ticket from Semtech LoRa Community
This native Semtech Packet Forwarder CANNOT be installed/uninstalled/configured through Cisco CLI like the approach of Actility LRR. You need to access the LXC to create your own channel profile.
Custonmized configuration is needed before running the software. Please use the config example(/tools/config_example.json) as a template if necessary. All other config templates are provide in /tools/templates/
Please create your config.json file under /tmp
4. Run pkt_forwarder
The software can be run in the LXC with "./pkt_forwarder" with all logs printed in console. If there is no parameters specified, the config file should be guaranteed to be named as "config.json", and the GPS device is "/dev/ttyS1" and SPI device is "/dev/spidev1.0" by default. Customized file name and device are supported through running with parameters.
Where could I find antenna patterns for Cisco Outdoor 5dBi Omni Antenna for 863-928 MHz LoRaWan?ANT-LPWA-DB-O-N-5 I am looking for standardised pattern file type .MSI or .ANT or .ADF at 868MHz Can anyone help or advise me a person to conta...
Hi, I'm working on a Cisco Lora gateway and I have a problem with installing packet-forwarder. Gateway#show packet-forwarder infoPublicKeyStatus : Not InstalledFirmwareStatus : Not Installed How can I install the packet-forwarder...