Internet of Things (IoT) Networking

Welcome to the IoT Networking community forum. Topics here include Industrial Routing, Industrial Switching, Industrial Wireless,  IoT Gateways, Low-Power Wireless (including LoRaWAN), and Embedded Networks. Please post your questions, use cases, sto...

I have aaa authentication with radius to a Windows NPS server along with the Azure MFA dll extension.   This is working and I am able to login via SSH but it isn't working for HTTPs/Web GUI. It will continuously prompt for user/pw on the web.    I ha...

Hello everyone,   I'm total newbie in this topic.I installed LoRaWAN gateway, but it shows Alert Severity critical Model of the device is IXM-LPWA-800-16-K9. Cann anyone help me?

After a year of operation the IXM started to act weird, currently i have no access and on console i get   i cannot ether login on prompt 82.611841] EXT4-fs error (device sda2): ext4_find_entry:1450: inode #2: comm rcS: reading directory lblock 0[ 82....

************************************************************************ IMPORTANT NOTE: This pre-installed native Semtech Packet Forwarder is strictly used for the lab validation only, not for any production or commercial purpose. Cisco did not exec...

Where could I find antenna patterns for Cisco Outdoor 5dBi Omni Antenna for 863-928 MHz LoRaWan? ANT-LPWA-DB-O-N-5   I am looking for standardised pattern file type .MSI or .ANT or .ADF at 868MHz   Can anyone help or  advise me a person to contact wi...

Hello! Currently I'm trying to develop a packet forwarder for the IXM LoRaWAN 2.0.20 using the SDK previously published in this community.   I have managed to cross compile some simple programs and got them to run on the gateway but I got stuck tryin...

Dear Folks:   I use the IXM at standalone mode. I create a autostart script and put it into the container's etc/init.d. How can I know this script running when IXM reboot.   Please help to advise   Ni Jie

From 2.0.30, the privilege of LXC is downgraded to user level by the request from our SP customer.   The "pcamap show" command in LXC will not show the true value of MAC address. bash-3.2# pcamap show MAC_ADDR: 00:00:00:00:00:00 MODEL_NUM: VERSION...

Standalone Mode - Cisco Wireless Gateway for LoRaWAN Software Configuration Guide - Cisco   Virtual IOS Interface Mode - Cisco IR800 Integrated Services Router Software Configuration Guide - Configuring Virtual-LPWA [Cisco 800 Series Industr…

Hello -   Are there any mechanical drawings available for the Cisco LoRAWAN router, sku# IXM-LPWA-800-16-K9?