12-13-2018 10:27 AM - edited 12-13-2018 01:43 PM
Hello All,
I upgrade my Asa's both primary and Secondary.
Everything seems to be fine, but i was not able to ping my management interface ip of my asa from my management server.
But i can ping the evrything from my asa.
ICMp inspect is there in group policy, what else i need to check?!
Best Regards,
Sandy!
Solved! Go to Solution.
01-03-2019 04:46 PM
Hello All,
The problem was there was no route between the management interface and the server.
After creating the route i was able to ping the management interface from the server .
thank you for all the help.
Best Regards,
Sandy!
12-13-2018 03:14 PM
Hi,
Try the command " icmp permit any management_interface" You can restrict the type of icmp by replacing the any with type of icmp e.g echo, echo-reply. management_interface is the name of the management interface
Thanks
John
12-17-2018 11:58 AM
Hello John,
Thanks for prompt reply!
I tried "icmp permit any management_interface" but still unable to ping the Management Interface ip from the management server.
I can ping management server ip from firewall, also i can ping asa management ip address from my switches.
My monitoring showing the asa is down because it couldn't ping the management interface ip address!
Best Regards,
Sandy!
01-03-2019 04:46 PM
Hello All,
The problem was there was no route between the management interface and the server.
After creating the route i was able to ping the management interface from the server .
thank you for all the help.
Best Regards,
Sandy!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide