03-25-2021 04:54 AM - edited 03-25-2021 04:56 AM
Hey, I tried to ping pc from routers but always failed. Is it cause my network configuration cause I use 1 switch and router and trunk mode. please answer cause it's for my exam tomorrow
i also attached my project.
03-25-2021 08:25 AM - edited 03-25-2021 08:26 AM
Not sure if we should help with homework or how mych... here are my tips:
Router does not have any configs. you are building so called Router-on-a -stick, ROAS. you can find samples of config in the book, here, or online, and modify it to fit your case. Switch looks OK, PCs can ping inside of its own vlans. For PC to ping others in different vlan, you will need ROAS router.
Regards, ML
**Please Rate All Helpful Responses **
03-25-2021 12:38 PM
03-26-2021 01:00 PM
ROAS using sub-interfaces to connect to switch; the sample config looks like :
interface FastEthernet0/0
no ip address
no shutdown
!
interface FastEthernet0/0.10
encapsulation dot1Q 10
ip address xyz
!
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address x y z
Regards, ML
**Please Rate All Helpful Responses **
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide