cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
958
Views
0
Helpful
6
Replies

Cisco 2960-24-PCL Web Browser appearance problem

tomnick
Level 1
Level 1

Hello everybody,
I bought 2 used 2960-24-PCL and configured them from scratch using the software 12.2(55)SE12. Everything works fine so far, I can login via web interface and it looks perfect. But: I can click any link on that site and it wont open except the "legend" window. I tried Brave, Edge, Firefox, different PC,  all the same. Does anybody have any idea what I might have done wrong? Thanks for some help.

1 Accepted Solution

Accepted Solutions

Use a Windows 7 machine with Internet Explorer browser.  

View solution in original post

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

Is there any CLI access?

yes, there is via serial

Post the complete output to the following commands: 

  1. sh version
  2. dir


@Leo Laohoo wrote:

Post the complete output to the following commands: 

  1. sh version
  2. dir

2 drwx 512 Mar 1 1993 00:31:38 +00:00 c2960-lanbasek9-mz.122-55.SE12
558 -rwx 1919 Mar 1 1993 00:02:11 +00:00 private-config.text
559 -rwx 3096 Mar 1 1993 00:02:11 +00:00 multiple-fs
560 -rwx 108 Mar 1 1993 00:38:51 +00:00 info
561 -rwx 1915 Mar 1 1993 00:02:22 +00:00 private-config.text.renamed
562 -rwx 1653 Mar 1 1993 00:02:10 +00:00 config.text

Directory of flash:/c2960-lanbasek9-mz.122-55.SE12/

3 -rwx 539 Mar 1 1993 00:31:38 +00:00 info
4 -rwx 9827106 Mar 1 1993 00:31:39 +00:00 c2960-lanbasek9-mz.122-55.SE12.bin
5 drwx 5632 Mar 1 1993 00:35:11 +00:00 html

Switch1#sh version
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(55)SE12, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Thu 28-Sep-17 02:53 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x01900000

ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(53r)SEY3, RELEASE SOFTWARE (fc1)

Switch1 uptime is 16 minutes
System returned to ROM by power-on
System image file is "flash:/c2960-lanbasek9-mz.122-55.SE12/c2960-lanbasek9-mz.122-55.SE12.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C2960-24PC-L (PowerPC405) processor (revision M0) with 65536K bytes of memory.
Processor board ID FCQ1732Y14N
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 50:17:FF:A3:61:00
Motherboard assembly number : 73-12619-05
Power supply part number : 341-0266-03
Motherboard serial number : FCQ17310PW3
Power supply serial number : LIT17250LVY
Model revision number : M0
Motherboard revision number : A0
Model number : WS-C2960-24PC-L
System serial number : FCQ1732Y14N
Top Assembly Part Number : 800-32808-02
Top Assembly Revision Number : A0
Version ID : V07
CLEI Code Number : COMCS00ARD
Hardware Board Revision Number : 0x02


Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C2960-24PC-L 12.2(55)SE12 C2960-LANBASEK9-M


Configuration register is 0xF

Use a Windows 7 machine with Internet Explorer browser.  

Uhhhhh, nightmare, you thing it wont work with "todays" system?