i have a flash drive with the current ios and trying to get it to boot from the card, i run the command boot disk0:s72033-adventerprisek9_wan-mz.122-33.SXH2a.bin it I get the following:
rommon 2 > dir disk0:
Initializing ATA monitor library...
Directory of disk0:
3 80075300 -rw- s72033-adventerprisek9_wan-mz.122-33.SXH2a.bin
9787 100165060 -rw- s72033-adventerprise_wan-mz.122-33.SXI1.bin
rommon 3 > boot disk0:s72033-adventerprisek9_wan-mz.122-33.SXH2a.bin
Please reset before booting
rommon 4 > reset
System Bootstrap, Version 8.5(2)
Copyright (c) 1994-2007 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
rommon 1 > boot disk0:s72033-adventerprisek9_wan-mz.122-33.SXH2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ############################################################################################################################################################## [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SXH2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 25-Apr-08 09:06 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x41C408E0
00:00:07: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Firmware compiled 07-Apr-08 22:12 by integ Build [100]
Earl Card Index= 259
00:00:07: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch
00:00:13: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
00:00:07: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
00:00:13: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 1048576 Kbytes of main memory
Autoboot executing command: "boot bootflash:"
loadprog: bad file magic number: 0x0
boot: cannot load "bootflash:"
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 1048576 Kbytes of main memory
rommon 1 >
I am trying to boot from the flash drive but it looks like it defaults to the system bootflash, what am i doing wrong.
i Have also tried
boot=disk0:s72033-adventerprisek9_wan-mz.122-33.SXH2a.bin
not sure what to do next
