cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2147
Views
0
Helpful
1
Replies

open(): Open Error = -66 loadprog: error - on file open boot: cannot load "flash:c3845-adventerprisek9-mz.124-16.bin"

zahid3
Level 1
Level 1

Hi,

i make formatting to my flash:

and i try to upload ios image from rommon mode via tftp

 

rommon 1 > IP_ADDRESS=192.168.1.2
rommon 2 > IP_SUBNET_MASK=255.255.255.0
rommon 3 > DEFAULT_GATEWAY=192.168.1.1
rommon 4 > TFTP_SERVER=192.168.1.1
rommon 5 > TFTP_FILE=c3845-adventerprisek9-mz.124-16.bin
rommon 7 > tftpdnld

IP_ADDRESS: 192.168.1.2
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 192.168.1.1
TFTP_SERVER: 192.168.1.1
TFTP_FILE: c3845-adventerprisek9-mz.124-16.bin
GE_PORT: Ge0/0
TFTP_MEDIA_TYPE: Copper
GE_SPEED_MODE: Auto

Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y

Mac Address: c47d.4f1f.aaf0

Receiving c3845-adventerprisek9-mz.124-16.bin from 192.168.1.1 !!!!!!!!!!!!!!

File reception completed.
Copying file c3845-adventerprisek9-mz.124-16.bin to flash:.
program load complete, entry point: 0x8000f000, size: 0xcb40

Format: All system sectors written. OK...
Formatting failure! Error code: -72

 

rommon 10 > boot flash:c3845-adventerprisek9-mz.124-16.bin
program load complete, entry point: 0x8000f000, size: 0xcb40
open(): Open Error = -66
loadprog: error - on file open
boot: cannot load "flash:c3845-adventerprisek9-mz.124-16.bin"
rommon 11 > dir flash:
program load complete, entry point: 0x8000f000, size: 0xcb40
open(): Open Error = -66
dir: cannot open device "flash:"

 

 

1 Reply 1

luis_cordova
VIP Alumni
VIP Alumni

Hi @zahid3 ,

 

Check this link to see the IOS download options:

https://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/15080-recovery-c3600.html

 

I hope you find it useful.

 

Regards