08-04-2020 05:12 AM
Hi,
im wondering what kind of QoS for VoIP can i implement in a very simple Packet Tracer lab. Like this:
I just need something that will show in the simulation how the configurations affected the network and VoIP. Regards.
Solved! Go to Solution.
08-04-2020 05:52 PM
not in PT, you cannot do much of QoS in PT unfortunately. for example, you can add command mls qos trust device cisco-phone but it does not do anything.
there is example of qos; go to PT Menu > File > open sample, look for a Router, then QoS .
Regards, ML
**Please Rate All Helpful Responses **
08-04-2020 05:52 PM
not in PT, you cannot do much of QoS in PT unfortunately. for example, you can add command mls qos trust device cisco-phone but it does not do anything.
there is example of qos; go to PT Menu > File > open sample, look for a Router, then QoS .
Regards, ML
**Please Rate All Helpful Responses **
08-05-2020 04:17 PM
Use the Inspect tool and inspect the QoS router's QoS Queues. See attached photo.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide