Probleme de config cisco ISR4431/K9

[angembaki2002]

bonjour a vous j'ai un probleme avec mon routeur qui que je ne trouve pas la commande voice service comment je peux resoudre ce probleme svp beoin d aide
voici la versin se mon cisco

appxk9 None Smart License None
uck9 None Smart License None
securityk9 securityk9 Smart License securityk9
ipbase ipbasek9 Smart License ipbasek9

The current throughput level is 1000000 kbps

Smart Licensing Status: UNREGISTERED/EVAL EXPIRED

cisco ISR4431/K9 (1RU) processor with 1694893K/6147K bytes of memory.
Processor board ID FGL2404L6K9
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
6598655K bytes of flash memory at bootflash:.
0K bytes of WebUI ODM Files at webui:.

Configuration register is 0x2102

[Flavio Miranda]

Hi

 You should have this license:

uck9  None Smart License None

[angembaki2002]

comment faire pour activer la lisance alors smart

[M02@rt37]

Bonjour @angembaki2002,

Il faut activer la licence uck9 qui te donnera accès aux features cme/srst.

(config)#license accept end user agreement

# licence boot module <module name> technology-package <package name>

#reload

[angembaki2002]

merci si je comprend bien comme j ai besoin de faire une configuration voice servive 

je doit juste faire cette commande ? licence boot module <module name> technology-package <package name>

[M02@rt37]

Bonjour @angembaki2002,

tout à fait!

[angembaki2002]

merci beaucoup mais pour ma version quel sera le non du module pour un service voice et module name> technology-package <package name>

[M02@rt37]

@angembaki2002, le module c'est ton chassis.

J'ai eu ça par exemple: 

Tu peux utiliser ? avec module pour voir le/les noms

[angembaki2002]

desile si je pose tout ce question oui j ai si tu peux vrement etre plus claire 

voici mon inventory 

NAME: "Chassis", DESCR: "Cisco ISR4431 Chassis"
PID: ISR4431/K9 , VID: V05 , SN: FGL2404L6K9

NAME: "Power Supply Module 1", DESCR: "250W AC Power Supply for Cisco ISR4430"
PID: PWR-4430-AC , VID: V02 , SN: DCC2349H0BD

NAME: "Fan Tray", DESCR: "Cisco ISR4430 Fan Assembly"
PID: ACS-4430-FANASSY , VID: , SN:

NAME: "module 0", DESCR: "Cisco ISR4431 Built-In NIM controller"
PID: ISR4431/K9 , VID: , SN:

NAME: "NIM subslot 0/0", DESCR: "Front Panel 4 ports Gigabitethernet Module"
PID: ISR4431-X-4x1GE , VID: V01 , SN:

NAME: "module R0", DESCR: "Cisco ISR4431 Route Processor"
PID: ISR4431/K9 , VID: V05 , SN: FOC2350AFA2

comment comment activer la bonne licence pour activer le service voice je veux faire un call manager 

[M02@rt37]

@angembaki2002 

tape la commande 

(config)#licence boot module ?

est donne moi l'output.

[angembaki2002]

DIMATECH_SIPTRUNK(config)#license ?
accept Accept all further License Agreements
agent Configure LIC_AGENT
boot license boot config commands
call-home license call-home config commands
feature License features
smart Smart licensing
udi license udi

DIMATECH_SIPTRUNK(config)#license bo
DIMATECH_SIPTRUNK(config)#license boot ?
level which level to boot
suite which suite to boot

DIMATECH_SIPTRUNK(config)#license boot

[M02@rt37 · Accepted solution]

@angembaki2002 

DIMATECH_SIPTRUNK(config)#licence boot level uck9

wr and reload

[angembaki2002]

merci beaucoup je crois que je l est trouver maitenent 

Enter configuration commands, one per line. End with CNTL/Z.
DIMATECH_SIPTRUNK(config)#voic
DIMATECH_SIPTRUNK(config)#voice se
DIMATECH_SIPTRUNK(config)#voice service voip
DIMATECH_SIPTRUNK(conf-voi-serv)#

[M02@rt37]

Parfait @angembaki2002 

[angembaki2002]

ce possible de faire la meme chose sur cette version ou il ya une difference svp 

Technology Package License Information:

-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 securityk9 Permanent securityk9
ipbase ipbasek9 Permanent ipbasek9

cisco ISR4321/K9 (1RU) processor with 1648789K/6147K bytes of memory.
Processor board ID FDO2223A186
6 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3125247K bytes of flash memory at bootflash:.

Configuration register is 0x2102