Setting the correct boot variable on the Cisco Router 1001-X

[mar-jaeger]

Hi,

I made a mistake; I set the wrong path in the boot variable.

This software should be loaded on the next reload:

asr1001x-universalk9.17.09.07a.SPA.bin

This is what the boot variable looks like now:

BOOT variable = bootflash:/asr1001x-universalk9.17.03.05.SPA.bin,12;flash:/asr1001x-universalk9.17.09.07a.SPA.bin,12;

Can you help me?

Thanks

[Leo Laohoo · Accepted solution]

conf t
 boot system flash bootflash:asr1001x-universalk9.17.09.07a.SPA.bin
 no boot system flash bootflash:/asr1001x-universalk9.17.03.05.SPA.bin
 no boot system flash flash:/asr1001x-universalk9.17.09.07a.SPA.bin
end
wr