cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1010
Views
5
Helpful
10
Replies

unable to connect CML UI IP via web browser

vikamchintan
Level 1
Level 1

Hi Team,

I have installed VMware workstation player 16. Installed CML 2.2.3 and 2.4 also. CPU 8 and RAM 16GB allocated. 

Unable to connect IP via web after configuring CML.I tried with browser HTTPS connection on and insecure content add/remove settings.

Attached is error on edge. similar error on chrome and firefox too received.

Please guide.

10 Replies 10

balaji.bandi
Hall of Fame
Hall of Fame

May be attachment missing, are you able to ping CML IP ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

vikamchintan
Level 1
Level 1

Yes, through VM CLI i am able to.

When i press F12 to see boot details, Network manager is failing to connect i guess . 

Attaching the error again. 

Any solutions to this?

vikamchintan
Level 1
Level 1

vikamchintan_0-1662970856021.png

How to check if CML UI IP is secured or not ? I am sure it must be, want to know how to find it out if possible.

Usually it should have lock mark like below. But has info mark when i try to open.

vikamchintan_1-1662970989029.png

 

vikamchintan
Level 1
Level 1

vikamchintan_0-1662971558768.png

is this can be issue ? If yes any solutions? I use wifi connection on my laptop.

vikamchintan_1-1662971733518.png

CML need to install fully before you access GUI , make sure you meet the hardware and system requirement.

https://developer.cisco.com/docs/modeling-labs/#!installing-cml

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

vikamchintan
Level 1
Level 1

Thank you Balaji for your response. 

Yes, i installed fully applied ISO file, then provided credentials. It booted to linux login screen. I logged in and pinged to given IP it worked. But when i open on browser it doesnt work. 

I have Windows 11 with i9 14core processor and 32GB RAM. I think it does meet system requirement. 

Could you please tell me what is reason behind network manager failed to start at boot? Why it is not found. 

vikamchintan
Level 1
Level 1

Hi Balaji,

Why are you asking for dual NIC in laptop?
System requirement says 1 interface only.

vikamchintan_0-1663153895449.png

Below is my system Network Adapter. May i know what you are referring to?

vikamchintan_1-1663153988561.png

 

 

becuase on my  old CML i had same issue with dual NIC so..

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

vikamchintan
Level 1
Level 1

Okay, so by this what i need to do to solve this issue?

I am still looking for solution. If you solved that what was the solution? How it can help me?

Please share.