Want Help in my university project

[muhammad-yazan1224]

Can any one help me for the task below

Task details:

You are tasked with designing, installing, and configuring a network for any organization (i.e. school, university, college) with the following requirements:

• The network should support a main campus (head office) and a minimum of three remote campuses (branch offices)
•  Use leased lines for WAN connectivity between campuses, implemented with routers.
• Configure OSPF (Open Shortest Path First) for dynamic routing across the network
•   At the main campus, implement three VLANs:

1. VLAN 10: Staff
2. VLAN 20: Faculty
3. VLAN 30: Students

• Implement centralized DHCP servers to assign IP addresses to devices across all campuses dynamically. Ensure DHCP Relay is configured for branch offices.
• Install and configure a Cisco firewall at the head office

[Flavio Miranda]

@muhammad-yazan1224 

 Sure you are going to be helped here. But, you need to get busy and do something. I am assuming you are going to do it in PacketTracer. What you have done so far?

[liviu.gheorghe]

Hello @muhammad-yazan1224 ,

share your PacketTracer file so we can have a look and give you some pointers.