In the specified device I checked the status of subslot as below:
INT-RT#sh hw-module subslot 0/0 transceiver 0 status The Transceiver in slot 0 subslot 0 port 0 is enabled. Module temperature = +19.269 C Transceiver Tx supply voltage = 3348.5 mVolts Transceiver Tx bias current = 28586 uAmps Transceiver Tx power = -4.7 dBm Transceiver Rx optical power = <-40 dBm
Now I am wondering which interface is the subslot 0/0 is connected, I mean which fiber should I investigate to check the problem?
sh hw-module subslot 0/0 transceiver 0 status The Transceiver in slot 0 subslot 0 port 0 is enabled. Module temperature = +28.476 C Transceiver Tx supply voltage = 3314.1 mVolts Transceiver Tx bias current = 2 uAmps Transceiver Tx power = -40.0 dBm Transceiver Rx optical power = -40.0 dBm
Use this command will show interface
sh hw-module subslot 0/0 transceiver 0 idprom detail IDPROM for transceiver TenGigabitEthernet0/0/0:
Businesses are integrating new technologies into their infrastructures to stay competitive. Even if your organization is a well-established business, sooner or later you will need professionals who possess knowledge of the latest technologies in the marke...
With the continual evolution of networks as a complex cluster of systems and devices, Cisco endeavors to protect and streamline networks with comprehensive Cisco Routing & Switching Track training courses. Categorized as four levels of network certifi...
I know I can configure intercom on an 8800 series phone to "whisper" to the call recipient and in order to have a two way conversation, the recipient will need to press a button on their phone to allow the two way conversation. Is it possible to program t...
Hi SRCUG, Looking forward to this month’s user group meeting. It will be held on Friday March 27th . This month’s meeting will feature a session on Wireless Network Design best practices. James Allen our Mobility CSE will spend time discussing this w...