Hi,
We are using Cisco ASA 5510 with 8.4(7).
I would like to configure an site to site vpn.
My side local ip 192.168.2.0/24
Other side has two lan
local 10.1.1.0/24 and 192.168.2.0/24
My requirement is to communicate with 10.1.1.0/24 from my local lan.
Since remote side also using same ip range, How can we get this done.? Policy based Nat will work here? Because we are already using many other vpn . So I don’t want to make any changes there. Please support. Thank You