InterOp Tests - Failover/Failback

[GuyPothiboon4406]

Hi,

In SIP Phone InterOp test plan, it has testcases for Failover/Failback that requires SBC FQDN but current DevNet Sandbox has SBC IP instead.

Please advice when is SBC FQDN available.

[skumar1]

Guy,
You can use the ip address instead of the FQDN, for failover you can go ahead and use the dummy ip address as mentioned in the test plan.

[GuyPothiboon4406]

Hi skumar1,

I don't quite understand how to use ip address instead of FQDN.  I checked testplan again and it does say to use SBC FQDN

From what I know these Failover/Fallback tests requires DUT to resolves SBC FQDN and the DNS returns two records: primary and secondary record, and the primary record is a dummy address so DUT will failover to secondary record.

[skumar1]

Guy,

I was under the impression that you were refering the testplan for release 22. For release 23 test plan it requires fqdn and currently it's not supported.