Dark mode bugs

[CMR]

I thought I'd start a thread about the various (often minor) dark mode bugs that still need sorting out. Please feel free to add any you find and hopefully we will get some developers reading this!

[spaladug]

@dunky Thanks for bringing this up. I was able to reproduce this issue and have notified engineering about the issue. Will circle back once I have an update.

[CMR]

Same bug as @dunky showed above, but this time on the camera settings page for the IR illuminators:

[spaladug]

@CMR Thanks for bringing this up. I was able to reproduce this issue and have notified engineering about the issue. Will circle back once I have an update.

[spaladug]

@CMR Good news as the fix for this issue was pushed out and the camera settings and what option is selected is now looking good on dark mode.

[dunky]

Same problem as previous (cannot tell which is enabled) in Wireless>Access Control in a couple of places:

[spaladug]

@dunky I've recently reported this issue on the Wireless -> Access Control page to engineering and they are investigating it. I'll circle back once there is an update.

[spaladug]

@dunky Good news is that the fix for this issue on the Wireless -> Access Control page to see which setting option is selected in dark mode has been pushed to production.

[dunky]

Super, thats much better, thank you

[dunky]

And they keep on coming.......

This one is at bottom of the Organization>Energy Management Page, white on white.....

[jvaldez2]

Hi @dunky 

Our engineering teams were able to push out a fix and this one should be fixed now. Let me know if you're still seeing it though.

[dunky]

@jvaldez2 Thanks, I can confirm that's now correct 🙂

[dunky]

And we still keep finding these anomolies.

This time Security & SD-WAN> Security Center

Click on most affected client - then Show this client only

You get a white bar with just the client name shown, all other info is white on white

I have selected the text below so you can see what is not visible

[dunky]

And another...

Org>Policy Objects

Add a new IP to an existing group: