device ssh?

[rwalker0111]

Hello,

We are doing a security audit and the vendor is asking if its possible to ssh to meraki devices ie firewall/switch/ap's. The use Tenable Nessus scanner to ssh and run scans against the device.

[IvanJukic]

Hi @rwalker0111 ,

The Local Status Page(LSP) is used to connect to Meraki devices. It is accessible securely via the local web browser on a host computer with credentials. The LSP uses secure connection between the host computer and the Meraki device to protect these sensitive settings.

For further details refer to the below section; Controlling Remote Access to the Local Status Page of the guide below

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page#Configuring_the_Local_Status_Page

[mloraditch · Accepted solution]

Meraki Managed devices do not have ssh enabled.

Cloud Monitored Catalyst Switches and WLCs can have SSH but that is not determined by the dashboard but by the local config.

[rwalker0111]

Thanks for the replies.