ECMS practice question - May 14th

[SandroNa]

Another week has gone by and as usual brought a weekend and an ECMS practice question!

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

See you in a week with the correct answer!

ECMS practice question

Which statement correctly describes the minimum Dashboard configuration requirements in order to turn on the wireless connectivity option for MV Cameras?

1. A minimum of 1 wireless profile need to be defined and assigned as Primary
2. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Backup
3. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Secondary
4. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Secondary and Backup

P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”

Here you can find previous questions

[Karsten Iwen]

An easy one if this has been done before and pure guessing if not.

Well, I go for last weeks answer plus one.

[andburne]

@Karsten IwenI c what you mean

[MerakiGnome]

Defo C on this one.

have a good weekend everyone

[kYutobi]

🌊the sea

[inderdeepsingh1]

C 👀

[CMR]

I Cee what you all mean, but for the life of me I cannot fathom out why it was done this way. The likelihood is that both profiles refer to an SSID on the same AP or set of APs so I would prefer A better answer...

[Karsten Iwen]

---

@CMR wrote:

I Cee what you all mean, but for the life of me I cannot fathom out why it was done this way. The likelihood is that both profiles refer to an SSID on the same AP or set of APs so I would prefer A better answer...

---

So many times I asked myself "Why did they implement it *that* way ...".

[alex.marquedant@marconet.com]

Would it be C, since you need a second one incase the first one is offline, guessing this is setup like this to make sure the cameras have a better chance of not going down.

[SandroNa · Accepted solution]

The correct answer is C!

For more info https://documentation.meraki.com/MV/Initial_Configuration/MV_Wireless_Configuration_Guide

From the wireless profile window, select a Primary and Secondary SSID. A third Backup SSID is optional.

Note: Two SSID profiles must be selected here. It is not possible to apply only a primary profile. Multiple SSID profiles allow for potential failover scenarios. The Meraki MV will prefer the Primary SSID and automatically failover to the Secondary followed by the Backup SSID.

[andburne]

@SandroNa @DavidLowe @rmarta Massive thank you to Sandro, David and Rafael. I passed my CMSS 500-220 ECMS Exam earlier today. These practice Q&As, ECMS1/ECMS2 and documentation site really helped!!!

[inderdeepsingh1]

@andburne : Congratulations buddy, Keep it up !

[andburne]

@inderdeepsingh1Thank You!

[rmarta]

@andburne Way to go!!!! So happy to see our practice questions helped! Congratulations on your achievement. Very well deserved!

[Karsten Iwen]

---

@andburne wrote:

@SandroNa @DavidLowe @rmarta Massive thank you to Sandro, David and Rafael. I passed my CMSS 500-220 ECMS Exam earlier today. These practice Q&As, ECMS1/ECMS2 and documentation site really helped!!!

---

Congratulation! Now we only have to wait for the appropriate CMSS badge on the community profile ... 😃