cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2397
Views
5
Helpful
3
Replies

Finding old devices...

B_97
Community Member

Hi Meraki Community,

in my warehouse, I found 3 old meraki devices:

-1xMR26 (which is end-of-sale and end-of-support)

-1xMS220-8P (which is end-of-sale)

-1xMX60 (which is end-of-sale and end-of-support)

Is there a way to reuse them (for example to set up a basic lab environment for students) buying licences and adding them to an organization?

1 Accepted Solution

Accepted Solutions

Ryan_Miles
Meraki Employee All-Star
Meraki Employee All-Star

The MR just uses a basic (non model specific) license. So a standard LIC-MR license would work for the MR.

And as far as I can tell MX60 and MS220-8P licenses are also still purchasable.

Based on the age of the devices they'll all be limited to certain firmware versions and features. But, could still be plenty useful for a simple lab IMO.

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Product_Firmware_Version_Restrictions

View solution in original post

3 Replies 3

Ryan_Miles
Meraki Employee All-Star
Meraki Employee All-Star

The MR just uses a basic (non model specific) license. So a standard LIC-MR license would work for the MR.

And as far as I can tell MX60 and MS220-8P licenses are also still purchasable.

Based on the age of the devices they'll all be limited to certain firmware versions and features. But, could still be plenty useful for a simple lab IMO.

https://documentation.meraki.com/General_Administration/Firmware_Upgrades/Product_Firmware_Version_Restrictions

CMR
Meraki Community All-Star
Meraki Community All-Star

@Ryan_Miles the MS220-8P runs the latest 17.1.2, it isn't dead yet!

If my answer solves your problem please click Accept as Solution so others can benefit from it.

MerakiGnome
Meraki Community All-Star
Meraki Community All-Star

Hi @B_97 , quick thought and might be a tad cumbersome but could you create a new Org every month and use the devices for that period, run down the trial license and then start the process over again.

Darren OConnor
https://www.linkedin.com/in/darrenoconnor