Hello All!
I try to use Cisco jabber with Virtual CME (only for phone services). Jabber client sucsess login, but telephone services not connected.
Connection to Phone Service failed ( CJ:2100:2)
Jabber version 14.3.1.58554, b308554
Cisco 8000v
cme#sh ver
Cisco IOS XE Software, Version 17.15.04
...
License Level: network-premier
License Type: Perpetual
Next reload license Level: network-premier
Addon License Level: dna-premier
Addon License Type: Subscription
Next reload addon license Level: dna-premier
The current throughput level is 400000000 kbps
...
cisco C8000V (VXE) processor (revision VXE) with 1656554K/3075K bytes of memory.
Processor board ID 936MDH0EKZ0
Router operating mode: Autonomous
3 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3960388K bytes of physical memory.
11526144K bytes of virtual hard disk at bootflash:.
Configuration register is 0x102
Configs
voice service voip
ip address trusted list
ipv4 192.168.10.0 255.255.254.0
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip handle-replaces
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
no trace
sip
bind control source-interface Loopback0
bind media source-interface Loopback0
session transport tcp
registrar server
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
...
voice register global
mode cme
source-address 192.168.10.2 port 5060
max-dn 24
max-pool 24
load 9971 sip9971.9-4-2SR4-1
load 9951 sip9951.9-4-2SR4-1
authenticate register
authenticate realm <***>
timezone 31
time-format 24
date-format D/M/Y
service https
tftp-path flash:
file text
ntp-server 192.168.11.252 mode unicast
camera
video
auto-register
....
voice register dn 11
number 2401
name Alexey
label Alexey
...
voice register pool 11
id device-id-name Jabber2401
session-transport tcp
type Jabber-CSF-Client
number 1 dn 11
cor incoming manager default
username l<***> password <***>
codec g711ulaw
phone-mode phone-only
camera
video
