The main focus of this session is to provide a better understanding of how Virtual Extensible LAN (VXLAN) / VXLAN Ethernet Virtual Private Network (EVPN) works and the best practices to deploy a Border Gateway Protocol (BGP) EVPN fabric. Data centers are complicated to manage and troubleshoot, particularly when they are related to VXLAN. Nevertheless, after BGP implementation for VXLAN emerged, the use of BGP EVPN for deployment and manageability has become much simpler. The Cisco Nexus 9000 has the capability to deploy VXLAN fabric with BGP EVPN. This event includes a live demonstration of this solution.
VXLAN EVPN overview
Vinit Jainis a technical leader with the Cisco Technical Assistance Center (TAC) and provides escalation support in areas of routing and data center technologies. He is an author of the Cisco Press titles “Troubleshooting BGP” and “Troubleshooting Cisco Nexus Switches and NX-OS”, and also for the Live lesson video series “BGP Troubleshooting”. Vinit is a distinguished speaker at various networking forums, which include global Cisco Live events on various topics. Before he joined Cisco, Vinit worked as a CCIE trainer and a network consultant. In addition to his CCIEs (No. 22854), he holds multiple certifications on programming and databases. Vinit has obtained a Bachelor of Mathematics degree and a Master’s degree in Information Technology in India.
Hello,We have one fabric composed by only 1 MDS 9148 switches, and now, we want to add a new 9148 S MDS switch to this fabric.one VSAN (100) and one zone set activated on this switch.Now, we need to add a new switch in fabric. This new switch is also one ...
Hi All, Spine Leaf designs I have seen so far show a single link from Leaf to each Spine and the recommended solution to increase aggregate fabric throughput is to add another Spine. Is it a valid design to have multiple links from Leaf to Spine to a...
I found two different theory to handle l3 traffic for unknown IP in ACI one is stated below which is from White Paper 739989 and in other cisco live document I have seen that this will be treated via spine proxy method. "For (L3) routed traffic to an...
I found below note in cisco white paper i.e 739989 - end point learning but unable to understand it. "An exception exists for remote MAC address learning when a packet is incoming from L3Out to Cisco ACI. If ARP traffic is coming from an L3Out SVI ra...
Dears ,Please check as the ACI sandbox does not accept any simple action on it from yesterday ? even creation of a tenant returns "Error: 400 - the messaging layer was unable to deliver the stimulus (connection error, Connection refused)"