Trying sandbox for WLC 9800 but timing out

[carlocon]

Hi team, 

Starting to work with some of the sandboxes on this site, as a Wireless engineer I wanted to start with the WLC 9800 sandbox that is always on. Basically wanted to try APIs to read telemetry, however after reading the instructions I have tried several times to access a link to accept a "certificate" from a link wlc9800.cisco.com and always timing out. I have tried being out of the VPN or in but no result on any case. Since this is one of my first attempts I am wondering if I am missing something or doing something wrong, since the instructions for SandBoxes always on according to documentation don't require VPN access. Let me know your comments please

Regards
Carlos Contreras

[Punit Joshi]

Hi can you paste your code here please.

[carlocon]

I was able finally to login to the Sandbox not sure why it was failing but now is working ok

[Elbets]

@carlocon Do you have the link for the 9800 sandbox. I cant seem to find it. 

thanks

[carlocon]

This was quite some time ago, if I remember correctly someone else confirmed that this sandbox was no longer available, lately I haven’t checked if it’s back, just a matter to check in the devnet site in the sandboxes, good luck !