Cisco 881W router config

[dada]

Hi,

I've a Cisco 881W router, where can I find the config in order to connect this router to my sandbox?

Thanks,

[jokearns1]

HI

I can post the router configuration minus the VPN configuration on this forum. The VPN config is dependant on the lab you are connecting to. Have you booked a lad through the DevNet Sandbox portal?

Joe Kearns

[dada]

Yes, just for a couple of hours to figure out how it works. Can you send me the config of the 881 router and instructions in order to adatp VPN config compare to a sandbox?

Thanks,

Philippe

[dada]

Hi Joe,

Have you posted the config and procedure somewhere? I haven’t seen it

Thanks,

Philippe

[travwill]

Hi Phillip,

Please see the configuration below for the basic HW VPN router: I have removed the specific VPN information that is dependent on which lab you reserve. Do you already have a sandbox reserved? If so, let me know which one and I can assist you in the VPN settings!

=======================================

Initial Configuration

=======================================

username test privilege 15 password cisco

ip dhcp pool SDM-POOL

  network 192.168.100.0 255.255.255.0

  default-router 192.168.100.1

  dns-server 10.10.20.100 8.8.8.8

  option 150 ip 10.10.20.1

  domain-name abc.inc

!

interface FastEthernet4

ip address dhcp

ip nat outside

!ip virtual-reassembly

duplex auto

speed auto

no shut

!

interface Vlan1

ip address 192.168.100.1 255.255.255.0

ip nat inside

ip virtual-reassembly

!

ip http server

ip http authentication local

ip http secure-server

ip http timeout-policy idle 60 life 86400 requests 10000

ip nat inside source list 10 interface FastEthernet4 overload

access-list 10 permit 192.168.0.0 0.0.255.255

line vty 0 4

exec-timeout 0 0

privilege level 15

password ciscopsdt

login local

transport input telnet

ip domain name abc.inc

ip name-server 4.2.2.3

ip name-server 8.8.8.8

=======================================

VPN Configuration

=======================================

interface Virtual-Template1 type tunnel

no ip address

tunnel mode ipsec ipv4

!

ip dhcp pool SDM-POOL

option 150 ip 10.10.20.1

!

crypto ipsec client ezvpn TRAFFIC

connect auto

ctcp

!!!Group and Key go Here

mode network-extension

!!!peer goes here

virtual-interface 1

!!!Username and Password go here!

xauth userid mode local

!

interface FastEthernet4

crypto ipsec client ezvpn TRAFFIC

!

interface Vlan1

crypto ipsec client ezvpn TRAFFIC inside

=======================================

Thank you,

Travis Williams