CML Web page is up but can't login

[Eric R. Jones]

Hello, I have aa connection via anyconnect version 4. I have an IP address appearing in the AnyConnect page; however the email and the information displayed on the GUI do not allow me to access the IP address associated to the HTTPS site. The username/password fail and according to the information "cisco cisco" doesn't work for the default login.

Anyconnect does report that  no policy server was found so I'm not sure if this is an issue here as it would be if I were using the VPN to access my work.

ej

[Gery Escalier]

Hello @Eric R. Jones  I don't know if you tried what they say in this related post
https://community.cisco.com/t5/network-access-control/anyconnect-system-scan-no-policy-server-detected/m-p/4472154#M569896

Greetings!

[Eric R. Jones]

Well that information would be helpful if I had access to the ISE server but I'm using DevNet so I'm at the mercy of the providers. The other issue is that the lab's I want to use show "Contains a resource(s) that is currently unavailable". That's been up for the last week or so. Unfortunately I haven't figured out how to setup ISE through CML2 on my local PC, thought I would use DevNet but that's been a bust.

[Eric R. Jones]

Easy fix, the cut and paste of the password was getting an extra space. It worked for the username but not the password. Now if only those resources for the DNA Center and ISE lab would get freed up. That's the lab I truly want to do but there's a note under all 3 for the last week stating resources are being used.