DevNet Sandbox always-on IOS XE on CSR only login in EXEC mode

[goncalo_gil1]

Hi Team,

I can SSH to DevNet Sandbox always-on IOS XE on CSR but only login in EXEC mode - No PRIV(enabled) mode.

login as: developer
Keyboard-interactive authentication prompts from server:
| Password:
End of keyboard-interactive prompts from server

Welcome to the DevNet Sandbox for CSR1000v and IOS XE

The following programmability features are already enabled:
- NETCONF
- RESTCONF

Thanks for stopping by.

csr1000v-1>
login as: developer
Keyboard-interactive authentication prompts from server:
| Password:
End of keyboard-interactive prompts from server

Welcome to the DevNet Sandbox for CSR1000v and IOS XE

The following programmability features are already enabled:
- NETCONF
- RESTCONF

Thanks for stopping by.

csr1000v-1>enable
Password:
% Access denied
csr1000v-1>show runn

                             ^

% Invalid input detected at '^' marker.

Thanks for your help.

[bigevilbeard]

Works now, i was able to login via the UI and remove the bad configuration. Someone had enabled aaa new-model, once this was removed it now works again

~ via  v3.11.0rc2 took 51s
❯ ssh developer@sandbox-iosxe-recomm-1.cisco.com
(developer@sandbox-iosxe-recomm-1.cisco.com) Password:

Welcome to the DevNet Sandbox for CSR1000v and IOS XE

The following programmability features are already enabled:
  - NETCONF
  - RESTCONF

Thanks for stopping by.


csr1000v-1#