Open NX-OS - Lab 1, switch is unreachable

[mtimm]

I reserved an Open NX-OS lab 2 last week without issue.  However, today when I reserved the Open NX-OS Lab 1, I received the standard e-mails and the final one said everything was up and ready to go.  I connected with Anyconnect and found I was unable to ssh into the switch but could ssh into the tools server.  I'll leave my reservation up and running in case that is needed to debug the issue.

Thanks,

Mike

[ecorban]

hi

when VPNed into the sandbox for this lab, please use ip address is 10.10.10.60 for access to this device.

thanks

[mtimm]

Can you explain what happened?  From last night:

$ ping 10.10.10.60

PING 10.10.10.60 (10.10.10.60): 56 data bytes

Request timeout for icmp_seq 0

Request timeout for icmp_seq 1

^C

--- 10.10.10.60 ping statistics ---

3 packets transmitted, 0 packets received, 100.0% packet loss

cisco@toolserver:~$ ping 10.10.10.60

PING 10.10.10.60 (10.10.10.60) 56(84) bytes of data.

From 10.10.10.117 icmp_seq=1 Destination Host Unreachable

From 10.10.10.117 icmp_seq=2 Destination Host Unreachable

From 10.10.10.117 icmp_seq=3 Destination Host Unreachable

^C

--- 10.10.10.60 ping statistics ---

5 packets transmitted, 0 received, +3 errors, 100% packet loss, time 4022ms

pipe 3

cisco@toolserver:~$

It was as if the switch never powered on.  However, this morning it is available.