06-10-2020 07:26 AM
Hi,
I can't reach any of the NX-OSv9K switches in my lab.
VIRL is up and running
(venv) [developer@devbox sbx_nxos]$virl up Sim sbx_nxos_default_eYUKKV already running
but I can't see any virl nodes:
(venv) [developer@devbox sbx_nxos]$virl nodes Here is a list of all the running nodes ╒════════╤════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕ │ Node │ Type │ State │ Reachable │ Protocol │ Management Address │ External Address │ ╞════════╪════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡ ╘════════╧════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛
And VIRL logs gives an error:
(venv) [developer@devbox sbx_nxos]$virl logs Exception raised while running your command Please open an issue and provide this info: 404 Client Error: Simulation "sbx_nxos_default_eYUKKV" not found. for url: http://10.10.20.160:19399/simengine/rest/events/sbx_nxos_default_eYUKKV
Off course I'm unable to reach them from from the DevBox:
(venv) [developer@devbox sbx_nxos]$ping 172.16.30.102
PING 172.16.30.102 (172.16.30.102) 56(84) bytes of data.
From 10.10.20.160 icmp_seq=1 Destination Host Unreachable
From 10.10.20.160 icmp_seq=2 Destination Host Unreachable
From 10.10.20.160 icmp_seq=3 Destination Host Unreachable
Regards
06-10-2020 09:50 AM
06-10-2020 10:08 AM
Already had, and followed the instructions.
But I still can't start the virl nodes :(
06-12-2020 09:14 AM
I just grabbed a reservation now.
[developer@devbox ~]$ls code Desktop Downloads sync_log.txt sync_version thinclient_drives venv
[developer@devbox ~]$source venv/bin/activate (venv) [developer@devbox ~]$cd code/sbx_nxos/ (venv) [developer@devbox sbx_nxos]$ls ansible-playbooks guestshell learning_labs LICENSE nx-api other pull-requests.md readme_images README.md requirements.txt sbx-mgmt topology.virl venv virl.log
(venv) [developer@devbox sbx_nxos]$virl ls --all Running Simulations ╒═════════════════════════╤══════════╤════════════════════════════╤═══════════╕ │ Simulation │ Status │ Launched │ Expires │ ╞═════════════════════════╪══════════╪════════════════════════════╪═══════════╡ │ sbx_nxos_default_03dH7f │ ACTIVE │ 2020-06-12T16:03:25.812234 │ │ ├─────────────────────────┼──────────┼────────────────────────────┼───────────┤ │ ~jumphost │ ACTIVE │ 2018-08-02T19:21:08.764190 │ │ ╘═════════════════════════╧══════════╧════════════════════════════╧═══════════╛
(venv) [developer@devbox sbx_nxos]$virl nodes Here is a list of all the running nodes ╒══════════════╤═════════════╤═════════╤═════════════╤════════════╤══════════════════════╤════════════════════╕ │ Node │ Type │ State │ Reachable │ Protocol │ Management Address │ External Address │ ╞══════════════╪═════════════╪═════════╪═════════════╪════════════╪══════════════════════╪════════════════════╡ │ nx-osv9000-1 │ NX-OSv 9000 │ ACTIVE │ REACHABLE │ telnet │ 172.16.30.101 │ N/A │ ├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤ │ nx-osv9000-2 │ NX-OSv 9000 │ ACTIVE │ REACHABLE │ telnet │ 172.16.30.102 │ N/A │ ├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤ │ nx-osv9000-3 │ NX-OSv 9000 │ ACTIVE │ REACHABLE │ telnet │ 172.16.30.103 │ N/A │ ├──────────────┼─────────────┼─────────┼─────────────┼────────────┼──────────────────────┼────────────────────┤ │ nx-osv9000-4 │ NX-OSv 9000 │ ACTIVE │ REACHABLE │ telnet │ 172.16.30.104 │ N/A │ ╘══════════════╧═════════════╧═════════╧═════════════╧════════════╧══════════════════════╧════════════════════╛ (venv) [developer@devbox sbx_nxos]$ping 172.16.30.101 PING 172.16.30.101 (172.16.30.101) 56(84) bytes of data. 64 bytes from 172.16.30.101: icmp_seq=1 ttl=254 time=2.31 ms 64 bytes from 172.16.30.101: icmp_seq=2 ttl=254 time=2.17 ms ^C --- 172.16.30.101 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 2.171/2.242/2.314/0.085 ms (venv) [developer@devbox sbx_nxos]$
I would tear down the reservation you have, make a new one and follow the above - you should see the same. Beware it does take a little bit for the devices to build. I did not have to virl up at all here, as this should pre-load and bring up the devices.
Hope this helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide