Unable to start reservation of CML

[mriggs78]

I've tried to setup a reservation two times now and I get the same error. My lab partner was able to start the same type of reservation without an issue. I get the initial email but the 2nd never arrives. I also get another error when attempting to end the reservation, It appears to eventually finish but when i try a new reservation i get the same error. Is there anything I can do on my side to resolve this?

Here's is the output console:

01:05:42 Environment Driver Setup has begun

Beginning sandbox setupPreparing connectivityApps deployment startedApps are being discovered...Connecting all appsApps are powering on...Waiting for apps IP addresses, this may take a while...No apps to configureSandbox setup finished successfully01:07:46 Just a moment - a few more things left to setup...

01:07:51 Setting POD Internet access policy

01:07:53 Waiting 4 minutes for all systems be become fully ready

01:11:54 Calling Setup on applicable resources

01:12:17 Beginning Setup for resource [Cisco Modeling Labs-7bea608e]

01:28:32 Errors reported during Setup for resource [Cisco Modeling Labs-7bea608e] 

01:28:32 

ERROR detected when calling Resource Driver Command [Setup] for resource [Cisco Modeling Labs-7bea608e].
Friendly Error Message: CML Setup Error from Resource:Cisco Modeling Labs-7bea608e
Technical Error Message: Tried Times 5:At Address:10.10.20.161
Error Location: UDC_RD_NSO_VIRLLicenseVIRL


01:28:41 None

01:28:41 Errors occurred preparing environment.   Please use the forum at
https://communities.cisco.com/community/developer/sandbox for assistance

01:28:41 Driver Complete.

[mriggs78]

This the output i got after the teardown finished.

01:48:29 Sandbox Lab Teardown Beginning -----

01:48:31 Ending VPN Connection

01:48:38 VPN Access Revoked

01:48:42 Calling Teardown on applicable resources

01:49:19 Beginning Teardown for resource [Cisco Modeling Labs-7bea608e]

01:54:51 Errors reported during Teardown for resource [Cisco Modeling Labs-7bea608e] 

01:54:41 Defaulting POD Internet access policy

01:54:43 Deleting Lab VMs

Beginning sandbox teardownDisconnecting all apps...Apps are being powered off and deleted...Cleaning-up connectivitySandbox teardown finished successfully01:56:12 Just a moment - a few more things left to clean up...

01:56:12 Teardown of all VMs complete

01:56:17 Clear POD ARP Cache Successful

01:56:20 Lab Teardown Complete. Bye Bye.  

[bigevilbeard]

From the error it looks like an licence issue or the sandbox cannot reach the licence server. 

Error Location: UDC_RD_NSO_VIRLLicenseVIRL

[mriggs78]

My thought as well. Is this something that's just temporary?

[bigevilbeard]

It can be yes. Try another reservation.