cancelar
Mostrar resultados para 
Pesquisar em vez de 
Queria dizer: 
cancel
929
Apresentações
2
Útil
9
Respostas

ASR1002 nao salva as configurações

Raphael Felix
Level 1
Level 1

Boa Noite,

Estou com um ASR1002 em estudo após efetuar algumas configuração executo o comando:
#copy running-config startup-config

Ele executado o comando:
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Router#

Mais ao reiniciar o equipamento ele não salva as configurações.

1 Soluções Aceita

Soluções aceites

@Raphael Felix  como suspeitei. Seu config-register é  "Configuration register is 0x2142"

 

0x2142

  • Ignores break
  • Boots into ROM if initial boot fails
  • 9600 console baud rates
  • Ignores the contents of Non-Volatile RAM (NVRAM) (ignores configuration)

Seu roteador está ignorando as configurações da NVRAM. Voce precisa mudar o config-register dele para o valor padrão 0x2102

Router#configure terminal 
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#config-register 0x2102
Router(config)#end

Ver solução na publicação original

9 RESPOSTAS 9

Olá @Raphael Felix 

 Poderia compartilhar a saida do comando "show version" ?

Router#show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.0(1)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 28-Jul-10 21:34 by mcpre

@Raphael Felix 

 Eu queria ver todo a saida. Tem um parametro chamado config-register que é mostrado no show verion. Esse parametro poderia explicar o porque você está perdendo a configuração no reload.

o valor que voce deveria ver é esse aqui:

Configuration register is 0x2102

 

 

Router>show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.0(1)S, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 28-Jul-10 21:34 by mcpre
 
 
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.  For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
 
 
ROM: IOS-XE ROMMON
 
Router uptime is 1 hour, 10 minutes
Uptime for this control processor is 1 hour, 12 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1000rp1-adventerprisek9.03.01.00.S.150-1.S.bin"
Last reload reason: Reload Command
 
 
 
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
 
A summary of U.S. laws governing Cisco cryptographic products may be found at:
 
If you require further assistance please contact us by sending email to
 
cisco ASR1002 (2RU) processor with 1717513K/6147K bytes of memory.
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7798783K bytes of eUSB flash at bootflash:.
 
Configuration register is 0x2142

@Raphael Felix  como suspeitei. Seu config-register é  "Configuration register is 0x2142"

 

0x2142

  • Ignores break
  • Boots into ROM if initial boot fails
  • 9600 console baud rates
  • Ignores the contents of Non-Volatile RAM (NVRAM) (ignores configuration)

Seu roteador está ignorando as configurações da NVRAM. Voce precisa mudar o config-register dele para o valor padrão 0x2102

Router#configure terminal 
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#config-register 0x2102
Router(config)#end

Raphael Felix
Level 1
Level 1

Agora deu certo, salvo a configuração, muito obrigado.

Pode me dizer se esse equipamentos esta com a versão atualizada?

Não está. Ultima versão é

Cupertino-17.9.3a MD

Voce pode me informar onde posso encontrar instruções sobre a atualização desse equipamento?