11-10-2016 01:25 PM - editado 03-21-2019 03:54 PM
we have followed any step, in the https://supportforums.cisco.com/blog/12696871/self-service-onboarding-setting-cspc-25-collector documentation.
How can i check if there is any sync problem between the collector and the Portal.
Thanks very much for the information.
Kind regards,
Silvina
el 11-14-2016 06:42 AM
Hi Silvina,
Can you please provide more details?
To be able to upload to the portal you need to make sure https traffic is allowed to the following IP address from the collector: 72.163.7.113
Regards,
Cesar
el 11-15-2016 06:04 AM
Hi Cesar, thanks for your reply
We have already test with nv command.
I would like to do a webex, to check everything.
I have already sent my info my email
el 11-15-2016 06:20 AM
Port Requirements (required for upload to Cisco)
Once the collector is configured, it will discovery, collect and upload your device data to the portal where you will be able to generate device reports. Please see the portal guide for instructions on using the portal.
el 11-15-2016 06:58 AM
Good morning.
If the traffic is allowed, then I'll need more details to determine if this is related to the collector configuration.
Can you please confirm:
Regards,
el 11-18-2016 10:53 AM
el 11-18-2016 11:14 AM
I don't see any hits from that collector on our side.
What I can suggest is that you create an upload profile and then share a screenshot. Please view the following for reference:
https://supportforums.cisco.com/es/discussion/13154481#comment-11698116
Cesar
el 11-22-2016 04:08 AM
Dear Cesar Campos,
We requested the support of a Cisco internal engineer, Guilherme Barbosa (GBarbosa), to upload profile and screenshots as suggested. This upload had been created and waited 48 hours, the strange thing is that the collector makes the discovery of all the devices and reports that the upload was done with success, however does not show the data in the portal. We check the date and time of the collector and they are correct.
In the attached file are the print screen that you requested.
Please, we need to resolve this case as soon as possible, as the end customer is dissatisfied!
el 11-22-2016 06:30 AM
Mauricio,
The screenshot that would help me is the upload run after it has completed. I want to know if there is an error. As you can see the "upload_to_backend" is in the stage of "running". What would help me is to see the result after it has ran.
Regards,
Cesar
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad