Re: App Activation error: Device association is missing with a USB device.

arun1587 · ‎06-14-2018

Hello,

I get this error while trying to activate a docker app on iox. The app basically tries to communicate to the serial USB device connected to the router. I followed the instructions from https://developer.cisco.com/docs/iox/#!sample/universal-serial-bus-usb-usage-in-the-app

info about my setup:

os version: 1.6.3

<<<<<< package.yaml file >>>>>

app:

cpuarch: "x86_64"

type: docker

resources:

profile: c1.large

network:

-

interface-name: eth0

devices:

-

type: usbdev

label: HOST_DEV1

function: serial

vendorID: "0483"

productID: "5740"

mandatory: True

<<<<<< lsusb from the container console >>>>

# lsusb

Bus 002 Device 003: ID 0483:5740

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0001

<<<<< dmesg output from the container console >>>>

usb 2-1: new full-speed USB device number 3 using ohci-pci

cdc_acm 2-1:1.0: ttyACM0: USB ACM device

<<< ioxclient platform device list snippet >>>>

"usbdev": [

{

"available": true,

"bus": "2",

"dev": "3",

"device_class": "02\n",

"device_id": "/dev/bus/usb/002/003",

"device_name": null,

"device_path": "/sys/devices/pci0000:00/0000:00:0a.0/usb2/2-1",

"generic_params": {},

"is_generic": false,

"is_storage": false,

"pid": "5740",

"port": null,

"storage_params": null,

"support_fstype": [

"vfat"

],

"type": "usbdev",

"used_by": null,

"vid": "0483"

}

<<<<<<</dev from the container>>>>>>>>

# ls -lrt /dev/

total 0

crw-rw-rw- 1 root root 1, 5 Jun 14 14:21 zero

crw-rw-rw- 1 root root 1, 9 Jun 14 14:21 urandom

lrwxrwxrwx 1 root root 10 Jun 14 14:21 tty1 -> /dev/pts/0

crw-rw-rw- 1 root root 5, 0 Jun 14 14:21 tty

lrwxrwxrwx 1 root root 15 Jun 14 14:21 stdout -> /proc/self/fd/1

lrwxrwxrwx 1 root root 15 Jun 14 14:21 stdin -> /proc/self/fd/0

lrwxrwxrwx 1 root root 15 Jun 14 14:21 stderr -> /proc/self/fd/2

crw-rw-rw- 1 root root 1, 8 Jun 14 14:21 random

drwxr-xr-x 2 root root 0 Jun 14 14:21 pts

crw-rw-rw- 1 root root 5, 2 Jun 14 14:21 ptmx

crw-rw-rw- 1 root root 1, 3 Jun 14 14:21 null

drwxr-xr-x 2 nobody nobody 60 Jun 14 14:21 net

crw-rw-rw- 1 root root 1, 7 Jun 14 14:21 full

lrwxrwxrwx 1 root root 13 Jun 14 14:21 fd -> /proc/self/fd

lrwxrwxrwx 1 root root 10 Jun 14 14:21 console -> /dev/pts/0

/ #

the app ran locally on my PC fine with the following command;

docker run -t -i --device=/dev/ttyACM0 test-app"

could you please let me know what is still missing?

thanks,

Geevarghese Cheria · ‎06-18-2018

Hi Arun,

Please check these related urls

Thanks and Regards,

Geevarghese

arun1587 · ‎06-18-2018

Hi Geevarghese,

I followed both the links that you pasted and I shared the error along with my configurations and output.

It would be great if you can help me looking at those configuration and output and let me know if there is something missing?

The USB device is also not listed by the localmanager.

thanks,

Arun

Steve Zhang · ‎06-24-2018

Please refer to https://developer.cisco.com/docs/iox/#!usb-device-usage/universal-serial-bus-usb and https://developer.cisco.com/docs/iox/#!sample.

And please note only USB storage and serial devices are supported for Cisco IOx.

arun1587 · ‎06-27-2018

Hello Steve,
I followed the link that you have shared. I've shared my package file and other outputs at the beginning of the thread.

Yes, I used a lorawan modem that can be enumerated as usb serial device.

I couldn't notice any obvious thing that is wrong in my configuration.

could you please let me know what can make a usb_serial device not to be listed by the localmanager? May be this could help further debugging the issue.

thanks,

yawming · ‎06-28-2018

I remember I have similar problem to use USB long time ago, don't remember what exactly was the error.

I remember I have to change one or two of following in yaml file, either product id , vendor id or device id or the combination of them.

Just FYI, don't if it helps.

devices:

-

type: usbdev

label: HOST_DEV

usage: Needs usb storage device to persist data

function: storage

mandatory: True

mount-point: /extra/storage/

device-directory-to-mount: /home/root/testUSB

vendorID: "067b"

productID: "2517"

"devices": [{"type": "usbdev", "label": "HOST_DEV", "device-id": "/dev/bus/usb/001/006", "vid":"067b", "pid":"2517"}]

}

arun1587 · ‎07-04-2018

I use the values of vid, pid of the device from the output of "ioxclient platform device list" and also I'm using the device as serial usb device.

I still see the USB device as undefined in ioxLocalManager.

output of "ioxclient platform device list" >>>>

"usbdev": [

{

"available": true,

"bus": "2",

"dev": "4",

"device_class": "02\n",

"device_id": "/dev/bus/usb/002/004",

"device_name": null,

"device_path": "/sys/devices/pci0000:00/0000:00:0a.0/usb2/2-1",

"generic_params": {},

"is_generic": false,

"is_storage": false,

"pid": "5740",

"port": null,

"storage_params": null,

"support_fstype": [

"vfat"

],

"type": "usbdev",

"used_by": null,

"vid": "0483"

}

package.yaml >>>>

app:

cpuarch: "x86_64"

type: docker

resources:

profile: c1.large

network:

-

interface-name: eth0

devices:

-

type: usbdev

label: HOST_DEV1

function: serial

vendorID: "0483"

productID: "5740"

mandatory: True

yawming · ‎07-05-2018

Have you checked this doc see if the USB is recognized and mounted properly?

https://www.cisco.com/c/en/us/td/docs/routers/access/800/829/software/configuration/guide/b_IR800config/guestos.html#con…

I ioxclient platform output looks like this:

"usbdev": [

{

"available": true,

"bus": "1",

"dev": "2",

"device_class": "00\n",

"device_id": "/dev/bus/usb/001/002",

"device_name": "/dev/sdc1",

"device_path": "/sys/devices/pci0000:00/0000:00:09.0/usb1/1-1",

"generic_params": null,

"is_generic": false,

"is_storage": true,

"pid": "2517",

"port": null,

"storage_params": {

"device_name": "/dev/sdc1",

"fs_label": "CORSAIR",

"fs_uuid": "1C2E-5359",

"fstype": "vfat",

"model": "USB_Mass_Storage_Device",

"mount_point": null,

"vendor": "Prolific_Technology_Inc."

},

"support_fstype": [

"vfat"

],

"type": "usbdev",

"used_by": null,

"vid": "067b"

}

],

"usbport": [

{

"available": true,

"device_id": "usb2",

"device_name": "usb-serial",

"ds_dids": [],

"support_fstype": [

"vfat"

],

"type": "usbport",

"used_by": null

},

{

"available": true,

"device_id": "usb1",

"device_name": "usb-ports",

"ds_dids": [

"/dev/bus/usb/001/002"

],

"pbus": "00",

"pdomain": "0000",

"pfunc": "0",

"pslot": "09",

"support_fstype": [

"vfat"

],

"type": "usbport",

"used_by": null

}

]

}

arun1587 · ‎07-06-2018

yep, I could see it in lsusb and also in /dev

root@Cisco829-GOS-1:~# ls -lrt /dev/ttyACM0

crw-rw---- 1 root dialout 166, 0 Jul 6 09:21 /dev/ttyACM0

root@Cisco829-GOS-1:~# lsusb

Bus 002 Device 005: ID 0483:5740

Bus 001 Device 001: ID 1d6b:0002

Bus 002 Device 001: ID 1d6b:0001

root@Cisco829-GOS-1:~#

yawming · ‎07-06-2018

Have you tried to activate it from ioxclient ? (with debug)

arun1587 · ‎07-25-2018

yes, I tried it with ioxclient and wasn't a successful try.

I will post the logs from debug here, shortly.

arun1587 · ‎07-25-2018

yes, I tried it with IOX client and wasn't a successful try.

I will post the logs from debug here, shortly.

arun1587 · ‎07-25-2018

$ cat activation_storage.json
{
"resources": {
"profile": "c1.large",
"cpu": "600",
"memory": "256",
"disk": "20",
"network": [{"interface-name": "eth0", "network-name": "iox-bridge0"}],
"devices": [{"type": "usbdev", "label": "HOST_DEV1", "device-id": "/dev/bus/usb/002/004", "vid":"0483", "pid":"5740", "device-name":"lorawan"}]
}
}

ioxclient application activate 1 --payload activation_storage.json
\Currently active profile : tcp-app-test
Command Name: application-activate
Payload file : activation_storage.json. Will pass it as application/json in request body..
Saving current configuration
Payload file : activation_storage.json. Will pass it as application/json in request body..
Could not complete your command : Error. Server returned 500
{
"description": "App Activation error: USB device not available for application use, but app has a mandatory dependency",
"errorcode": -1021,
"message": "Error while changing app state"
}
acklio@acklio:~/workspace/src/bitbucket.org/acklio/tcp-app$

arun1587 · ‎07-26-2018

"device-name" - I couldn't find any definition for this field in https://developer.cisco.com/docs/iox/#!usb-device-usage/universal-serial-bus-usb. but it seems to be a mandatory field because without which I get the following error.

ioxclient application activate test --payload activation_storage.json
Currently active profile : tcp-app-test
Command Name: application-activate
Payload file : activation_storage.json. Will pass it as application/json in request body..
2018/07/26 10:08:03 POST /iox/api/v2/hosting/apps/test/state?action=activate HTTP/1.1
Host: 192.168.1.112:8443
Content-Type: application/json
X-Token-Id: dd55ab15-c593-4367-8129-5467c445e8fb

{
"resources": {
"profile": "c1.large",
"cpu": "600",
"memory": "256",
"disk": "20",
"network": [{"interface-name": "eth0", "network-name": "iox-bridge0"}],
"devices": [{"type": "usbdev", "label": "/dev/ttyACM0", "device-id": "/dev/bus/usb/002/002", "vid":"0483", "pid":"5740"}]
}
}

Error. Server returned 500
{
"description": "App Activation error: 'device-name'",
"errorcode": -1021,
"message": "Error while changing app state"
}