01-18-2017 02:09 AM
Hello, I'm trying to simulate data sending over iU880B LoRa device (https://wireless-solutions.de/products/gateways/iu880b-usb.html) from IOx. Can someone help me on how can I do that?
Thanks!
Solved! Go to Solution.
01-19-2017 04:59 PM
Hi Andrei,
Basically the USB for IR8x9 IOx support the general serial interface or USB storage for the USB interface currently.
If you have software drivers and the LoRa stack implemented on its USB dongle hardware, you may use a generic serial interface for communication. Or if the USB dongle needs IOx software drivers and a LoRa stack, IOx does not support it yet. Hope it helps.
Thanks,
Steve
01-19-2017 04:59 PM
Hi Andrei,
Basically the USB for IR8x9 IOx support the general serial interface or USB storage for the USB interface currently.
If you have software drivers and the LoRa stack implemented on its USB dongle hardware, you may use a generic serial interface for communication. Or if the USB dongle needs IOx software drivers and a LoRa stack, IOx does not support it yet. Hope it helps.
Thanks,
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide