Edge Computing Infrastructure

Hi, Cisco IOx sounds really promising and exciting but doing some researches, I have found a lot of blogs saying that in addition to the Cisco Connected Grid Routers, CGR1120 and CGR1240, Cisco added IOx support to 16 other Cisco platforms, including...

Hi guys, I have a temperature sensor that supports RS-485 and requires to connect to IR829 Serial 0.Can I directly use an ethernet cable(Cat5) to connect the sensor with s0 port, (like sensor pin 485+ 485- connect to RJ45 pin 1&2)or need a converter ...

Hello everybody, I have an application that is meant to run in NAT mode in IOx with some port forwardings. After installing the IOS15.9.3M1 on my IR809, the new IOx1.10.0.6 doesn't do the port forwarding I requested for the port 1731:1731. The proble...

If, via the console, you see that your device is booting to the "rommon-2" prompt, and so not to IOS directly, you can use these instructions to fix that. This may happen after you have reset the device, for example. For instructions on how to reset,...

Hi, I have a problem with IOx server failing after a certain time. The server works fine but then drops out the first time GI0 loses connection. After that GI2 can't be reached anymore and my docker application loses connection. I have provided logs ...

Hi all,   Im trying to enable Guestshell on my ISR4331 but need to enable iox first, when I go to enable fox the command is not recognised, neither is any box command.   im running 16.06.03 Everest, sample output below     STR-LAB-01-RTR-01#guestshel...

Hi All, Throwing this out there with very little understanding around what I am doing, sorry! Hoping someone can tell me if I'm wasting time or come up with a great idea. I have a use case to run Microsoft Azure IoT Edge at remote sites to provide so...

Hello,we are currently evaluating the ir829 for possible use as wifi hotspot.We use CoovaChilli as a hotspot. Problem is, that chilli is expecting layer 2 access to the networking device.We are using an LXC container that works very well in a pure LX...

vHi,I want to connect multiple hosts via catalyst 3560 switch to Ge1 interface of IR829.I have already created a VLAN 10 at Ge1 with IP 192.168.10.254.How do I configure the switch to make it work in this scenario? My other settings for cellular and ...

Hi, I'm trying to build an application that could do packet inspection on the switch traffic (multiple interfaces)I think this is possible because there exists a snort IPS ova by Cisco that does a similar thing.What I'm missing is how exactly the app...

Hello allWith IOx 1.2 and ioxclient 1.2.1.0, you will be able to use a docker image and create an iox application from it. To do that, you will be using the "ioxclient docker package" command (https://developer.cisco.com/media/iox-dev-guide-11-15-16/...