C370 - 7.6.3-019 An application fault occurred: ('snmp/ipmi_handlers.py _handle_fan_result|370'

[Peterson Santos]

I got the following CRITICAL error at C370:

The Critical message is:

An application fault occurred: ('snmp/ipmi_handlers.py _handle_fan_result|370', "<type 'exceptions.ValueError'>", "invalid literal for int() with base 10: 'no reading'", '[_coro.pyx coro._coro._wrap1 (coro/_coro.c:8477)|757] [egg/interface_controller.py poll_ipmi|1409] [snmp/hardware.py update_sensors|89] [snmp/ipmi_handlers.py update_sensors|609] [snmp/ipmi_handlers.py _parse_sensor_lines|583] [snmp/ipmi_handlers.py _handle_fan_result|370]')

Version: 7.6.3-019

Maybe this bug is related to WSA bug CSCzv78978...

Need a help to see if this bug is resolved at 8.0.1-023 release.

[Robert Sherwin · Accepted solution]

This is ESA defect on 7.6 family... see the following:

https://tools.cisco.com/bugsearch/bug/CSCzv22991

You'll need to upgrade to 8.0.1-023, or you can open support case, we can provision 8.5.6 FCS, or you can wait for our 8.5.6 GA release shortly...

I hope this helps!

-Robert

(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

[Peterson Santos]

Tks a lot Robert