06-09-2013 12:03 AM
Hi all,
So I have an IronPort C670. I'm grepping the mail logs and see a message of interest. The log shows MID of 12345. If I try to do a showmessage and enter the MID, i get back a "MID 12345: Not found". Am I looking in the wrong place? Wanting to get more info on this particular message.
Thanks!
Solved! Go to Solution.
06-09-2013 05:00 PM
The command (showmessage) will works only when the message is still in the appliance. Not if it was already delivered.
You can use findevent or grep to track the message and how it was processed by the appliance.
Regards,
-V
Sent from Cisco Technical Support iPhone App
06-09-2013 05:00 PM
The command (showmessage) will works only when the message is still in the appliance. Not if it was already delivered.
You can use findevent or grep to track the message and how it was processed by the appliance.
Regards,
-V
Sent from Cisco Technical Support iPhone App
06-09-2013 10:42 PM
Thanks for the response Valter. findevent is what I needed.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide