cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1991
Views
0
Helpful
5
Replies

repengstatus and repengupdate command

group2xxx
Beginner
Beginner

Hi Dear support

It seems that repengstatusrepengupdate command removed in AsyncOS 14.0.692. If it happened, why there isn't any notification about it? and why, there isn't anything in the manual?

 

Best Regards, Janet

1 Accepted Solution

Accepted Solutions

SriramV
Cisco Employee
Cisco Employee

Yes. looks this communication is missed in ESA and in Docs

 

ESA 13.5 has major engines changed, IP, URL and SBNP. 

repng was changed TALOS. but the clean-up activity was taken care in 14.0.

That’s why commands were precent in 13.5.x even though repng was not active.

 

repengstatus -> talosstatus

ESA_13.5_test> talosstatus
Component                           	Version              		Last Updated
Sender IP Reputation Client         	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
URL Reputation Client               	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
Service Log Client                  	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
Talos Engine                        	1.95.0.203           	21 Jan 2020 11:00 (GMT +00:00)
Talos Intelligence Services Module.     1.95.0.523           	21 Jan 2020 11:00 (GMT +00:00)
Talos-HTTP2 Component              	0.9.274              	21 Jan 2020 11:00 (GMT +00:00)
Libraries                           	1.0.0-001            	21 Jan 2020 11:00 (GMT +00:00)
Protofiles                          	1.0.0-001            	21 Jan 2020 11:00 (GMT +00:00)

repengupdate -> talosupdate (both command will just invoke updatenow)

ESA_13.5_test> talosupdate
Requesting update for Talos components

View solution in original post

5 Replies 5

SriramV
Cisco Employee
Cisco Employee

Yes. looks this communication is missed in ESA and in Docs

 

ESA 13.5 has major engines changed, IP, URL and SBNP. 

repng was changed TALOS. but the clean-up activity was taken care in 14.0.

That’s why commands were precent in 13.5.x even though repng was not active.

 

repengstatus -> talosstatus

ESA_13.5_test> talosstatus
Component                           	Version              		Last Updated
Sender IP Reputation Client         	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
URL Reputation Client               	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
Service Log Client                  	1.0.0-1350196        	21 Jan 2020 11:00 (GMT +00:00)
Talos Engine                        	1.95.0.203           	21 Jan 2020 11:00 (GMT +00:00)
Talos Intelligence Services Module.     1.95.0.523           	21 Jan 2020 11:00 (GMT +00:00)
Talos-HTTP2 Component              	0.9.274              	21 Jan 2020 11:00 (GMT +00:00)
Libraries                           	1.0.0-001            	21 Jan 2020 11:00 (GMT +00:00)
Protofiles                          	1.0.0-001            	21 Jan 2020 11:00 (GMT +00:00)

repengupdate -> talosupdate (both command will just invoke updatenow)

ESA_13.5_test> talosupdate
Requesting update for Talos components

Hi SriramV, Thanks for answer. By the way, is there any way to see latest version of ESA component to see our status? It can help us to understand our update situation.

 

Thank's - Janet 

ESA_13.5_test> enginestatus all

CASE Status: UP CPU: 0.0% 
Component Version Last Updated 
CASE Core Files 3.6.0-028 18 Feb 2019 15:48 (GMT +00:00)
CASE Utilities 3.6.0-028 18 Feb 2019 15:48 (GMT +00:00)
Structural Rules 3.6.0-20190218_163700 18 Feb 2019 21:12 (GMT +00:00)
Web Reputation DB 20190216_065447 18 Feb 2019 15:48 (GMT +00:00)
Web Reputation DB Update 20190216_065447-20190219_031204 19 Feb 2019 03:13 (GMT +00:00)
Content Rules 20190219_030709 19 Feb 2019 03:18 (GMT +00:00)
Content Rules Update 20190219_031722 19 Feb 2019 03:18 (GMT +00:00)
Bayes DB 20190217_122202-20190217_130518 18 Feb 2019 15:48 (GMT +00:00)

SOPHOS Status: UP CPU: 0.0% 
Component Version Last Updated 
Sophos Anti-Virus Engine 3.2.07.375.0_5.58 18 Feb 2019 15:51 (GMT +00:00)
Sophos IDE Rules 2019021803 18 Feb 2019 15:51 (GMT +00:00)

GRAYMAIL Status: UP CPU: 0.0% 
Component Version Last Updated 
Graymail Engine 01.408.00 18 Feb 2019 15:48 (GMT +00:00)
Graymail Rules 01-410.02#54 19 Feb 2019 03:08 (GMT +00:00)
Graymail Tools 2.7-003 18 Feb 2019 15:48 (GMT +00:00)

MCAFEE Status: UP CPU: 0.0% 
Component Version Last Updated 
McAfee Engine 5900 Never updated 
McAfee DATs 9171 18 Feb 2019 16:30 (GMT +00:00)

AMP Status: UP CPU: 0.0% 
Component Version Last Updated 
AMP Client Settings 11.1.0-010 18 Feb 2019 15:48 (GMT +00:00)
AMP Client Engine 1.0 Never updated 

Hi Mr. SriramV & so many thanks for your reply. I know this command, but i was looking for some sources in Cisco to compare our existing version with latest version, so let me to describe it more:

 

When we logon to Cisco Community-> Technology and Support-> Security-> Email Security, we will understand, the latest ESA AsyncOS is 14.0.0-692 because it's in the right side up in the page. So is there anything like this for other feature keys DB's ?

 

Best Regards, Janet

ESA Feature changes are available Release Notes.

ESA engine (like AV, AS, DLP etc) version are not documented anywhere.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: