10-07-2019 09:00 AM
Hi,
1) I had a vESA and I try to do a local upgrade using windows IIS but it not working. I had this error message "Could not connect to manifest server." when I tried to do a upgrade. Below are the Service Updates I configure.
2) I had created clusterconfig on 2 ESA. But when I did a config change on one of the ESA, there is a warning "commit sent to 1 of 2 machines". How do i rectified this?
10-07-2019 03:30 PM
Hey Daniel,
For the local upgrade issue, you would need to find out what is the reason of the error - perhaps tailing the upgrade_logs or updater_logs when you attempt the upgrade will provide a bit more information.
For the cluster connectivity - log into each machine and run a 'clusterconfig' and make sure they're both connected.
After which run a clusterconfig -> connstatus to ensure they're connected properly, if not you will see an output of possible errors there.
Let us know how it goes.
Regards,
Mathew
10-07-2019 11:13 PM
For the local upgrade issue, you would need to find out what is the reason of the error - perhaps tailing the upgrade_logs or updater_logs when you attempt the upgrade will provide a bit more information.
Ans:
- tail upgrade_logs: failure downloading list: could not connect to manifest server.
- tail updater_logs: failed to acquire the server manifest.
For the cluster connectivity - log into each machine and run a 'clusterconfig' and make sure they're both connected.
After which run a clusterconfig -> connstatus to ensure they're connected properly, if not you will see an output of possible errors there.
Ans:
- Both the ESA are communicating via IP address and port 22
- When I did a list, I am able to see both ESA.
- For connstatus, it shown as connecting.
- I am able to ping from ESA1 to ESA2 and vice versa, I also did a telnet using port 22 and it shown as connected.
- Both the ESAs are in the same segment but using production link instead of management link. Both ESAs version(9.1.2-041) and featurekeys are the same.
10-08-2019 02:17 PM
10-29-2019 11:10 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide