Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
1) I will like to check and verify is it possible to do EAP-TLS via machine certificate for a non domain join computer? If so how do I go about doing it? The non domain computer will be manually signed by the CA server. As of now, I had a workaro...
Hi, When I goes to Cisco Switch Selector (https://www.cisco.com/c/en/us/products/switches/switch-selector.html) and choose the switches to compare. The website will just load and goes back to the original page. Is anybody facing this issues as well? ...
Hi, Currently the Cisco ISE is using version 3.0 Patch 2 which support PLR. After generating the authorization code from SCCM. It produce the below code (this is an example from C9300 instead of Cisco ISE): Qns:How am I going to input these code int...
Hi, Currently I am facing this issue. The AP(9120-AXI) is in low power mode when it is connected to a media converter(MC). From my understanding, 9120-AXI required 802.3at(25.5w) to have the full functionality which indeed the MC support 802.3at & 80...
Hi, I am currently using WLC 9800 with AP 9120. When I upload a file via ftp to a server using 1 laptop, the upload speed was around 60MB/s. But when I am using 2 laptops to upload to the same server, the upload speed was shared. Laptop A got around ...
Hi Rob,
I saw from "https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/214975-configure-eap-tls-authentication-with-is.html", it stated "Active Directory is typically used to support Machine Authentication against the compu...
Is there any steps/guides on how to do it on the Cisco ISE? I tried and it failed, thus I tried with a join domain computer using machine certificate, everything was working successfully. Is there anyway to verify if it due to the signed cert on the ...
For my case Cisco backend did some linkage to the end customer smart licensing account. Then my side is able to generate the PLR and activate successfully.
Hi HooHong, How do I go about generate a PLR authorize code instead of SLR authorize code? I generated the code by going to "Inventory > Licenses > License Reservation" after that I input the reservation request code that is extract from Cisco ISE. I...
