A. To create new virtual gateway's,
We would recommend that you go to the support portal and download the PDF version of the AsyncOS Advanced User Guide. (http://www.ironport.com/support/login.html )
Once you have the PDF of the Advanced User Guide, search for this
"USING VIRTUAL GATEWAY TECHNOLOGY"
This section will get into details on how Virtual Gateways work on the Ironport appliance.
How many virtual gateways can be configured on each appliance?
-- AsyncOS 5.1.x and up
C10/1x0 4 Virtual Gateways
C30/3x0 32 Virtual Gateways
C3x0D 256 Virtual Gateways
C60/6x0 32 Virtual Gateways
X10x0 32 Virtual Gateways
B. To assign the virtual gateway IP's to a group and have delivery go to this group, follow these steps.
Warning: Can only be done from the command line of the appliance
1. After you've created your virtual gateway IPs, type "interfaceconfig"
2. then type, "groups" and add the IP's that you want to this group.
3. Press enter a few times to return to the main prompt and type "commit"
4. Then, type "deliveryconfig" and it will allow you to choose which interface to use. Select the new gorup that you created in the steps above.
5. "commit" changes.
If there are multiple IP's in the group that you create, it will round-robin through the IP addresses.
Hi All,
1) Is it possible can i able to create virtaul interface for Outlgoing mails in the Ironport c350 box. ?
2) Or - Can I assign a Pool of Ip Address for outgoing interface and the Ironport c350 box will pick any ip address and send the mail?
Anyone help me for above doubts?
Thanks in Advance,
Ram.N
