How to integrated FMC with AMP private Cloud

[peter.peng]

Hi Sir:

   When I want to connect to my AMP private cloud. It ask me to provide the Certificate path.

What's this ? And how to setup it ?

The other issue:

If I want to connect to public cloud. Why it  can't redirect to public cloud web site ?  How can I check it ?

[Sunil Kumar]

Hello Peter,

Login to your Virtual Private Cloud - Admin Portal, navigate to Integration > Firepower Management Center. Steps of integration &  certificate are  mentioned there.

For the redirection to work, ensure that FMC's should have Internet connectivity/ Reachability to Private cloud. You can login to FMC CLI (SSH) and check the connectivity using ping, telnet, curl, netstat, nslookup commands.

Regards,

Sunil Kumar

[peter.peng]

Hi Sir:

    I have one question I must confirm with you about DNS record. Is it right ?

My private cloud ip is: 192.168.0.118  and my Firepower ip is: 192.168.0.110

DNS A record:

       console.x.x map to 192.168.0.118

       ds.x.x         map to 192.168.0.118

       dse.x.x.      map to 192.168.0.118

       fmc.x.x.     map to 192.168.0.118 (Firepower Management Center Link)

T

[Marvin Rhoads]

The FQDN console.x.x is the A record. the ds.x.x and dse.x.x FQDNs are cnames (aliases) using the same IP address.

I'm not positive about the FMC link entry. 

[peter.peng]

Hi Sir:

   ok, no problem and thanks for your help. I will try to test it.

[peter.peng]

Hi Sir:

   I will try it. Thanks for you help.

But the secondary issue: That's I want to connect to public cloud , not private cloud.

Because I want to test public and private cloud. Thanks.