Hi,
Can someone help me understand the effect of implementing metric in the address family ipv4 rather than in a specific interface.
Please see below config for reference.
router isis 123
is-type level-2-only
net xx.xxxx.xxxx.xxxx.xxxx.xx
nsf ietf
log adjacency changes
lsp-gen-interval maximum-wait 5000 initial-wait 1 secondary-wait 50
lsp-refresh-interval 1800
max-lsp-lifetime 1855
address-family ipv4 unicast
metric-style wide
fast-reroute per-prefix priority-limit critical
fast-reroute per-prefix tiebreaker node-protecting index 10
metric 1023 level 2
mpls traffic-eng level-2-only
mpls traffic-eng router-id Loopback10
