09-22-2016 06:59 AM - edited 02-20-2020 09:01 PM
Recently installed a new ASA with firepower solution (version 6.1) and they have an existing FireAMP deployment. I go into defense center and go to AMP->AMP management and tell it to register with the cloud and then get redirected to the fireAMP login page. After logging into FireAMP console, no option or box comes up to authorize the connection. One document listed going to Account->Applications but there is no application option listed under account.
So what is still needed to tell FireAMP to send data to Defense center?
09-26-2016 11:51 AM
Hello bhartsfield,
Is the user logging into the FireAMP console as an Administrative User?
Admin access is required to link the AMP for Endpoints Console and the Firepower Management Center.
This would be an explanation why you the Applications option is not viewable when navigating to Accounts in the AMP console.
10-02-2016 01:15 AM
There are two helpful links which you can refer :-
http://www.cisco.com/c/en/us/support/docs/security/sourcefire-fireamp-private-cloud-virtual-appliance/118289-technote-fireamp-00.html
http://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/AMP-Config.html#18377
Regards
Jetsy
02-03-2017 12:23 PM
There are two helpful links which you can refer :-
http://www.cisco.com/c/en/us/support/docs/security/sourcefire-fireamp-pr...
http://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/F...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide