Linking FireAMP to defense center

[bhartsfield]

Recently installed a new ASA with firepower solution (version 6.1) and they have an existing FireAMP deployment.   I go into defense center and go to AMP->AMP management and tell it to register with the cloud and then get redirected to the fireAMP login page.  After logging into FireAMP console, no option or box comes up to authorize the connection.  One document listed going to Account->Applications but there is no application option listed under account.

So what is still needed to tell FireAMP to send data to Defense center?

[kwalcott]

Hello bhartsfield,

Is the user logging into the FireAMP console as an Administrative User?

Admin access is required to link the AMP for Endpoints Console and the Firepower Management Center.

This would be an explanation why you the Applications option is not viewable when navigating to Accounts in the AMP console.

[Jetsy Mathew]

There are two helpful links which you can refer :-

http://www.cisco.com/c/en/us/support/docs/security/sourcefire-fireamp-private-cloud-virtual-appliance/118289-technote-fireamp-00.html

http://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/AMP-Config.html#18377

Regards

Jetsy 

[Farhan Mohamed]

There are two helpful links which you can refer :-

http://www.cisco.com/c/en/us/support/docs/security/sourcefire-fireamp-pr...

http://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/F...