12-10-2013 11:08 PM - edited 03-11-2019 08:16 PM
Hi Support Team,
Now my customer have bought 2 ASA5525-X to use at HQ site and DR site. They want to do anyconnect mobile vpn on both device. Support Team can see attached file for more detail. I need the immediately respone.
Thanks in advance!!!!
Regards,
Hi support team,
thanks for your quick respone.
My question is how to configure
Anyconnect mobile vpn with dual ISP at HQ site?
and if both ISP at HQ down, so it will automatic go to DR site.
Could you help me for this?
Thanks in advance!
Regards,
Message was edited by: so theng
Solved! Go to Solution.
12-11-2013 09:38 PM
Hello,
I can refer to the first options by using SLA monitoring and tracking (ofcourse you will need to enable Webvpn on both interfaces.
Use this link for the SLA,Tracking config
Of course they are using IPSec, just change the VPN setup to Anyconnect and you will be done.
I dont think the last option or request can be done bud
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-12-2013 04:57 AM
Hello,
First of all, remember to rate all of our helpful posts
Now, here is the configuration examples:
Anyconnect
SLA
Now for the reroute-option to the other office we could Use optimal gateway selection or a server list (but you will need to manually select the ASA that you want to connect to).
https://supportforums.cisco.com/docs/DOC-15326
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-13-2013 05:26 AM
Hello,
Hey So Theng,
It's always a pleasure to help .
After you have tested let us know and if working please mark it as answered.
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-11-2013 04:44 AM
Hello,
What is the question????
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-11-2013 06:56 PM
Hi support team,
thanks for your quick respone.
My question is how to configure
Anyconnect mobile vpn with dual ISP at HQ site?
and if both ISP at HQ down, so it will automatic go to use ISP3 at DR site.
Could you help me for this?
I really need your help.
Thanks in advance!
Regards,
12-11-2013 09:38 PM
Hello,
I can refer to the first options by using SLA monitoring and tracking (ofcourse you will need to enable Webvpn on both interfaces.
Use this link for the SLA,Tracking config
Of course they are using IPSec, just change the VPN setup to Anyconnect and you will be done.
I dont think the last option or request can be done bud
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-11-2013 11:53 PM
Hi support team,
I'm very very thanks so much for your quick support. I have already seen your link and see some config in that. You know I'm new to next generation firewall 5525-X series and also new to anyconnect mobile vpn. So I think that this document mayby not help me alot. Could you help me provide more document about sample config anyconnect mobile vpn by using dual ISP?
Your help is very usefull to me.
I'm waiting your respone.
Thanks in advance.
Regards,
12-12-2013 04:57 AM
Hello,
First of all, remember to rate all of our helpful posts
Now, here is the configuration examples:
Anyconnect
SLA
Now for the reroute-option to the other office we could Use optimal gateway selection or a server list (but you will need to manually select the ASA that you want to connect to).
https://supportforums.cisco.com/docs/DOC-15326
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
12-12-2013 07:06 PM
Hi Support Team,
I'm very very so thanks to you. I will do as your guide for my implementation.
I will let you know about my implementation later wether it is 100% correct or have some issue while doing configuration.
your help is very helpful to me!!!!!!
Thanks,
Regards,
12-13-2013 05:26 AM
Hello,
Hey So Theng,
It's always a pleasure to help .
After you have tested let us know and if working please mark it as answered.
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com
01-05-2014 11:59 PM
Dear Julio Carvajal,
Now I have completed my configuration on anyconnect vpn, It is Ok now. I'm very much thanks for your help.
Thanks,:)
Best Regards,
Sotheng
01-06-2014 06:20 AM
Hello,
Awesome news
Thanks
Looking for some Networking Assistance?
Contact me directly at jcarvaja@laguiadelnetworking.com
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com
05-25-2018 11:48 AM
Hi, what´s the correct configuration for do this anyconnect?
Thanks
DP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide