03-24-2014 04:37 AM - edited 03-11-2019 08:59 PM
We have Cisco ASA 5510 Firewall
Having 4 public ips in which 3 are working without any issues.
The 4th public ip previously working but suddenly it stoped.
it will work only if i connect the cable to LAN and Manually assign the Public IP.
My ASA Regular Static Nat configuration:
access-list 101 extended permit ip any host X.X.X.X
static (inside,outside) X.X.X.X 10.10.3.7 netmask 255.255.255.255
03-25-2014 02:36 AM
Hi,
If configuration as same as ealier when every thing was working fine and no other configuration changes are made on firewall during that time period, thats mean to issue with configuration. Just do reconfigure specific part of configuration that you mentioned above, I hope it will work.
Don't forget to rate helpfull posts.
Sajid Ali Pathan
03-25-2014 04:12 AM
The other public ips are working with the same configuration.
But only one ip having issues
03-25-2014 04:19 AM
Hi,
I got you reply on email but not on support forum, I don’t know what bug is this with cisco community. Leave it, come to the point:
I understand you next question, you have to do as i said, Just reconfigure static net for problematic IP.
Don't forget to rate helpfull posts.
Sajid Ali Pathan
03-25-2014 06:29 AM
yes i tried so many times but still nothing.
03-27-2014 05:49 AM
do i need to remove all the access-list configuration?
i means remove all and reconfig it again .. Will work?
Please reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide