cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
966
Views
0
Helpful
1
Replies

Cisco ASA 8.03 Log Message?

smoothnetworks
Level 1
Level 1

I see alot of these messages on our Firewall a Cisco ASA 5510 and we are not running this protocol, any ideas what it actually is?

local4.alert %ASA-1-106021:Deny SCPS reverse path check from 0.0.0.0 to 172.29.4.1 on interface dmz1

local4.alert %ASA-1-106021:Deny SCPS reverse path check from 0.0.0.0 to 172.29.5.1 on interface dmz2

local4.alert %ASA-1-106021:Deny SCPS reverse path check from 0.0.0.0 to 172.29.6.1 on interface dmz3

local4.alert %ASA-1-106021:Deny SCPS reverse path check from 0.0.0.0 to 172.29.7.1 on interface dmz4

local4.alert %ASA-1-106021:Deny SCPS reverse path check from 0.0.0.0 to 172.29.8.1 on interface inside

1 Reply 1

didyap
Level 6
Level 6

Explanation This message is generated when a packet arrives at the security appliance interface that has a destination IP address of 0.0.0.0 and a destination MAC address of the security appliance interface. In addition, this message is generated when the security appliance discarded a packet with an invalid source address, which can include one of the following or some other invalid address.

Review Cisco Networking for a $25 gift card